By Alvin Dong | Project Manager
Testing is an important part of maintaining elevator equipment and meeting applicable requirements. Two terms building owners and property managers may encounter are Category 1 and Category 5 testing.
Category 1 Testing
Category 1 (CAT 1) testing is performed annually on elevators and includes a number of checks to functions and equipment.
Depending on the elevator, notable testing may include:
- Brake testing
- Firefighters’ emergency operation
- Standby power operation
Owners should plan for downtime when this work is scheduled. CAT 1 testing can require each elevator to be removed from service for approximately one day, although actual timing can vary based on the equipment and circumstances.
For buildings with limited elevator availability, planning ahead can help minimize the impact on occupants and building operations.
Category 5 Testing
Category 5 (CAT 5) testing applies to traction elevators and certain hydraulic elevators and is required on a five-year cycle.
One of the most significant elements is full-load testing. During this process, the elevator is loaded to its rated capacity and specific conditions are created to verify the operation of required safety components.
Because the testing recreates demanding operating and safety scenarios, building owners should understand the potential impact on the equipment and cab finishes before the work begins.
Some elevator contractors may offer alternative testing methods sometimes described as “non-destructive” CAT 5 testing. Availability and suitability should be confirmed directly with the elevator maintenance contractor for the specific equipment.
CAT 5 testing can require approximately two days of downtime per elevator, although schedules will vary depending on the elevator and testing requirements.
Connect with GUNN to ensure your elevators are meeting periodic testing requirements.